华为交换机怎么看光模块信息

如题所述

第1个回答  2023-12-22

以华为5700系列交换机为例,查看光模块信息命令如下:
查看指定端口光模块的常规、制造、告警以及诊断信息。
display transceiver interface gigabitethernet 0/0/1 verbose
gigabitethernet0/0/1 transceiver information:
-------------------------------------------------------------
Common information:
Transceiver Type                       :1000_BASE_SX_SFP
Connector Type                        :LC
Wavelength(nm)                       :850
Transfer Distance(m)                 :300(50um),150(62.5um)
Digital Diagnostic Monitoring   :YES
Vendor Name                           :SumitomoElectric
Vendor Part Number                :HFBR-5710L
Ordering Name                        :
-------------------------------------------------------------
Manufacture information:
Manu. Serial Number            :88K056C10353
Manufacturing Date              :2008-08-08
Vendor Name                       :SumitomoElectric
-------------------------------------------------------------
Diagnostic information:
Temperature(°C)                   :26.00
Temp High Threshold(°C)      :85.00
Temp Low  Threshold(°C)      :-40.00
Voltage(V)                            :3.29
Volt High Threshold(V)         :3.64
Volt Low  Threshold(V)         :2.95
Bias Current(mA)                  :4.57
Bias High Threshold(mA)      :9.00
Bias Low  Threshold(mA)      :2.00
RX Power(dBM)                    :-40.00
RX Power High Threshold(dBM)   :0.00
RX Power Low  Threshold(dBM)   :-16.99
TX Power(dBM)                           :-5.03
TX Power High Threshold(dBM)   :-2.22
TX Power Low  Threshold(dBM)   :-6.99
-------------------------------------------------------------
其中:RX Power(dBM)  
光模块接收功率。当接收功率为0瓦时,显示为-Inf。  
RX Power High Threshold(dBM)
光模块接收功率上限。  

RX Power low Threshold(dBM)  
光模块接收功率下限。  

TX Power(dBM)  
光模块发送功率。当发送功率为0瓦时,显示为-Inf。  

TX Power High Threshold(dBM)  
光模块发送功率上限。  

TX Power Low Threshold(dBM)  
光模块发送功率下限。

A: 交换机支持使用命令查看光模块型号及收发光功率。

    使用命令display interface interface-type interface-number查看某光口插入的光模块的信息。

    使用命令display transceiver diagnosis interface查看所有光口的收发光功率信息。

    使用命令display transceiver diagnosis interface interface-type interface-number查看某光口的收发光功率信息。

例如:使用命令display transceiver diagnosis interface GigabitEthernet 0/0/1查看到的信息如下:

Port GigabitEthernet0/0/1 transceiver diagnostic information:                    Parameter        Current     Low Alarm    High Alarm                              Type            Value      Threshold    Threshold    Status                    

-------------   ---------    ---------    ----------   --------                  
TxPower(dBm)    -4.83        -11.02       -2.00        normal                    
RxPower(dBm)    NA           -18.01       -1.00        NA                        
Current(mA)     6.38         2.00         14.00        normal                    
Temp.(C)        44.00        -20.00       90.00        normal                    
Voltage(V)      3.31         2.90         3.70         normal